Heat transfer T-shirt production process
Release Date:04/03/2017
Would you like to start his own studio heat transfer friend, can refer to the advice we give equipment and production process. The heat transfer tools and equipment: HCM-F4217C roller printing machine 1 sets, 1 sets of 1 printers, thermal transfer ink (six), transfer paper: ATT light dark heat transfer (or by thermal transfer paper. Factory to you to make a picture, using a large industrial drawing machine for production so the cost is very low, the picture can be well after the direct transfer).
After the heat transfer equipment ready above, then you can follow the process to make the following operation: first T-shirt, the first pattern print to transfer paper, then the pattern surrounding the blank section cut with scissors; the second step, the pressure roller printing machine to increase the temperature to 195 degrees, time to 20 second, start again and let the machine temperature up to 195 degrees; the third step, the plate will be printed on the T-shirt on roller printing machine, rollers, back off the paper pattern will be accomplished! Above for light T-shirt, dark is dark (similarly, if you want to cut the effect need to use the engraving machine The other part of the removal of the film is only to put the dark paper on the clothes off, and then put a piece of paper or transfer can be transferred. (the pressure is small, the temperature of 175 degrees for a time of 8 seconds)
Prev: NEW roller Heat Printing machine
Next: Matters needing attention when use of roller heat transfer machine