Talk about roller printing machine considerations
Release Date:11/01/2017
Roller printing machine for continuous printing speed to meet customer demand for bulk printing.
We use imported heating pipe, imported oil. Even heating, durable; imported blankets, blanket is not easy to wear.Do you know the matters needing attention of the roller printing machine?Here to discuss with you: you know roller printing machine considerations?Below and we discuss together:
1. instructions to the customer installation, parameter setting, troubleshooting and operation of relevant considerations, please safekeeping.
2. installation and debugging before use, please read the instructions carefully to avoid equipment due to incorrect operation or personal accident damage.
3. the user must be installed in accordance with the machine rated power matching power supply wire and special leakage protection switch.
4. the machine before starting the appearance must separate grounding reliably, otherwise may cause serious personal injury accidents.
5. the machine must be installed in a ventilated and bright place. not less than 1.5 meters of space around the machine, vertical and horizontal installation.
6. working in unusual circumstances should immediately stop checking. carpet should also be taken out of the drum, and fan help cooling, prevent damage to the carpet.
7. operators must strictly abide by ban marks on various parts of the machine to operate.
8.Because it is the thermal mechanical, so in the process of using, shaft rod or heating element and the size of the bearing may be due to thermal expansion will make some noise, this is normal phenomenon, don't panic.
9.Box on the control circuit board and the inverter normally should be kept clean, there must be no dust and metallic conductive objects fall into. Go electrical protective cover may not open, be careful of electric shock.
10.If you need to replace the heating element, speed reducers, heat-conducting oil, must use our special models may not be allowed to modify, replace.
11.Heating tube in vitro table through special processing must not enter the scratch with corrosive liquid scrubbing and hard objects.