How Multi-function roller heat printing machine to make pressure?
Release Date:18/01/2017
How to make pressure of roller heat printing machine?Now HCM heat printing machine minor edits talk with you.
Multi-function roller heat printing machine installed into interlining cloths and white cloth into the installation.Interlining cloth using a tight,white cloth into the use of loose,using manual feed mode,so that the fabric shape surrounded by hanging, photoelectric tube control the speed of cloth to ensure cloth is slack into the drum,so that the fabric the same tension,each the best effect of transfer.Non-interlining printing machines only a white cloth into the fabric installed.
Clothing pressure mechanism of roller printing machine: pressure mechanism through the cylinder axis bearings at both ends of cylinder pressure. In order to make printed patterned clear about printing paste evenly, size must be appropriate pressure, pressure is too light, light printed pattern color, and never show too much is vague distortion, also added to increase power consumption, increase parts wear. Usually bold, large patterns of cylinder pressure and as a light version of the roll with light pressure, thin cylinder with pressure lines, moire, and snowflakes.
Line pressure in the range of 100--600N/cm and 200--400N/cm. With the length of the cylinder is different, each cylinder of the total pressure up to 2x104--8x104N. In addition, the pressure mechanism should meet the following technological and operational requirements:
1. Both centralized control of cylinder and bearings of advance and retreat, and pressures of accurate adjust left and right sides respectively.
2. The system should be flexible, when joint press point or axis is bent, will have a dampening effect, passive pressure reduction.
Prev: NEW roller Heat Printing machine
Next: Mr. Feng from HCM :There is plenty of room to improve (exclusive interview)